EC logoEliot Cornu

Case study · Team project · BUT GEII

SAE Brakes

Eight wireless modules on a vehicle's running gear, and an Android app to monitor suspension and brakes live.

  • ESP32-C6
  • IMU
  • Infrared
  • BLE

Context

SAE Brakes is a BUT GEII team project, carried out with Lucas Brevard and “Tonton”. The aim: instrument a vehicle's running gear to see, while it is driving, how the suspension wishbones move and how hot the brake discs get.

Goal

Fit eight small wireless modules, two per wheel, and follow their measurements live on a phone: no cable to run along the chassis, no computer on board.

Working mock-up

Working mock-up of the SAE Brakes projectAn isometric vehicle carries eight wireless modules: at each wheel, an inertial sensor fixed on the suspension wishbone and an infrared thermometer aimed at the brake disc. Measurements go up over Bluetooth Low Energy to a phone, which can send back a tare command.FLRL
Inertial measurements are sent 25 times per second, temperatures twice per second. The phone can send a tare command back to an inertial sensor.
  1. Four inertial modules: a XIAO ESP32-C6 and an ICM-20948 IMU fixed on each suspension wishbone. X, Y, Z accelerations, resultant, pitch and roll.
  2. Four temperature modules: a XIAO ESP32-C6 and an MLX90614 infrared thermometer aimed at each disc, contact-free. Ambient and disc temperature.
  3. “SAE Brakes” Android app: connects by itself to the eight modules over Bluetooth Low Energy and displays everything live.
  4. Tare: from the app, a command zeroes the axes of an inertial sensor once the vehicle is stopped.

Approach

  1. Choose the hardware: a tiny microcontroller with built-in Bluetooth, I2C sensors, a small 3.7 V battery per module.
  2. Move from Wi-Fi to Bluetooth: a first version displayed the measurements on a web page served by a central module. The current version drops Wi-Fi and the server: each module talks directly to the phone.
  3. Set a common contract: each module announces its type and wheel in its name (front left, front right, rear left, rear right), and sends its measurements in a single format that the app can read.
  4. Build the app: a 3D cube that follows the sensor orientation, X, Y, Z curves, the temperatures of the four discs, remote tare, assignment of modules to wheels and recording of a session to a CSV file.
  5. Test module by module: each module can be checked on its own with a generic Bluetooth app before being fitted.

Results

Limitations